Subpar Problematic Bitaxe Gamma Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It looks great when it works, but it often doesn't. Print at your own risk.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 70
- Makes
- 0
- Views
- 896
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
It looks great when it works, but it often doesn't. Print and use at your own risk!
The concept of this enclosure was to guide the air, which worked fairly well, but the back still needed to be opened up for the Bitaxe Gamma to not get too hot as there wasn't enough pressure created by only the front fan, no matter how well the air was guided.
This enclosure was designed around the Bitaxe Gamma 601 from OSMU, but before the fan connector location was changed. The slightes offset of many components could lead to the enclosure not fitting. Don't even try to make it fit other versions or batches, you're going to have a bad time and at worst damage your bitaxe.
No supports needed but the Ducts need a brim.
Did I mention, Print and use at your own risk?