Kit Fisto's Collapsing Lightsaber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This version of the lightsaber has been broken into different parts so they can be printed separately and assembled.
- Rating
- 0 / 5
- Likes
- 5
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
This is the multi-part version of the lightsaber. It has been broken into different parts so they can be printed separately in different colors then glued together. There are locators for making the parts easy to glue on. The cap is screwed on so the blades can be printed separately then inserted or replaced. You will need to do some filament swaps at layer heights for a full color version.
The hilt prints upside down so the fins by the emitter will print without supports. Make sure you add a large brim or helper discs because there is not a lot of contact with the bed. There are two versions of the hilt and cap. One version is split apart for a multi-color printer the other is one piece for single color or manual color swaps.
None of the parts require supports, for best results use a .4mm nozzle. You can print the blades all at once concentrically or one at a time in vase mode. Find detailed instructions on how to print collapsing swords on my website.
Assembled with Starbond Medium CA Glue (aff.)
Printed on the Prusa XL(aff.) with Polymaker Metallic Pro PLA