1 / 5
Alternate A-Piller for 4 lane pico with Ebb42 — image 1
1 / 5

Alternate A-Piller for 4 lane pico with Ebb42

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Made for fitting pico MMU to top of Neptune 4 series Gantry.

Rating
5 / 5
Likes
15
Downloads
75
Makes
1
Views
772
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

This was a remix of Nick1's alternate A-pillar to fit the Neptune 4 series printers.  When using the included mounting block for the top of the gantry, the power and usb connections will point to the back of the machine instead of hanging off the front.    The included mounting block will register into the top of the gantry extrusion and is designed to use the stock filament spool hanger M4 mounting screws and nuts. 

To use, mount Nick1's gear cover to the mounting block with an M4x8 screw, and assemble the pico.  Once assembled, before adding the ebb and cover, attach the alternate A-piller to the mounting bracket with the 2nd M4x8 screw.

 

Added a new mounting bracket for setting the MMU behind the top gantry bracket on a Neptune printer

BOM

  1. 2 - M4x8 Button head screws
  2. 2 - M4 Heat set threaded adaptors
  3. Stock mounting screws and t-nuts
  4. 4 - M3 x 14 button head screws
  5. 4- small profile M3 heat set threaded adaptors.  4.2mm OD.  https://www.amazon.com/gp/product/B0BBSLL6G7

Print as shown

Tags