1 / 5
Prusa MK4S, electronic box cover, USB power output mod — image 1
1 / 5

Prusa MK4S, electronic box cover, USB power output mod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of the official el-box-cover_R4 part, allowing to install USB power converter. I use it to power my Buddy3d Cam.

Rating
5 / 5
Likes
30
Downloads
61
Makes
0
Views
677
Reviews
1

Updated at source:

Model information

License
GNU General Public License v2.0

This mod allows you to add a USB power output at the back of your Prusa MK4S. 
I use it to power my Buddy3D camera directly from the printer.

Required Parts

  1. M3 threaded inserts x6
  2. 25mm M3 bolts x2
  3. 10mm or 12mm M3 bolts x6 (You can reuse two bolts left from the original cover)
  4. 2mm zip ties x2
  5. DC-DC Adapter 12V/24V to USB 5V 3A
    Example: Haofy DC-DC Adapter 12V/24V to USB 5V 3A Converter 
    (This is not an affiliate link; it’s just the one I used.)

Printing Instructions

  • Material: PETG
  • Orientation: Print as oriented in the provided file.
  • Settings:
    • 3 perimeters
    • 0.3mm layer height
    • Standard 0.4mm nozzle
  • Supports: Required

No other special recommendations. 
Use the provided 3MF project file for reference.

Assembly Instructions

  • Solder the Power Converter:
    • Solder the power converter’s electric clamps if required.
  • Install Threaded Inserts:
    • Place the six M3 threaded inserts into the 3D-printed part.
      • Four inserts go into the corners to secure the lid.
      • Two inserts go in the middle to hold the power converter.
  • Position the USB Output Socket:
    • Slide the USB output socket into its slot.
    • Secure it using two 2mm zip ties.
  • Connect Power Wires:
    • Pass both wires through the square hole of the 3d printed part
    • Attach the red (+) wire to the red power output.
    • Attach the black (−) wire to the black power output.
  • Route the NFC Power Cable:
    • Pass the NFC power cable through the round hole in the lid.
  • Install the New Cover:
    • Secure the box cover to the printer using two 25mm M3 bolts.
  • Attach the Power Converter:
    • Position the power converter and secure it using 10mm M3 bolts.
  • Attach the NFC Module:
    • Glue the NFC module to the lid. Normally the original double tape survives.
    • Attach the NFC cable securely.
  • Close the Electronics Cover:
    • Place the lid back on the printer and secure it with the 10mm M3 bolts.

Enjoy your new USB power output for the Prusa MK4S! Feel free to reach out with any questions or feedback.

I've also attached Fusion360 project if you'd like to tinker it further.

Tags