1 / 6
20x20 extrusion accessorizor (extrusion hanger system) — image 1
1 / 6

20x20 extrusion accessorizor (extrusion hanger system)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Helps attach useful items to a 20x20 aluminum extrusion bar

Rating
0 / 5
Likes
10
Downloads
37
Makes
0
Views
268
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

20x20 extrusion accessorizor

While using 20x20 aluminum extrusions in some of my 3D prints, I found myself needing to quickly attach random useful items to the extrusion bar. For that, I built the following accessory container box (green) that fastens to the extrusion via a fastener bar (yellow) and which gets fixed in place by a clip (purple). Feel free to modify the box or attach the adapter (light green) to other 3d printed accessories. 

This model comprises of 1) a fastener bar that clasps onto a groove of the extrusion, 2) a container (or a female dovetail component that can be fused to any other 3d model) that attaches to the opposite side of the fastener bar via dovetail fasteners, and 3) a clasp (purple) serves as a stopper to prevent the fastener bar from sliding on extrusion.

Example of a use case: I use the accessory box (white) to hold my eye pieces and add counter balance to Anders’ 114 Travel Telescope (free; paid), especially when using unusually heavy eyepieces and phone mounts for photography.

Assembly

  1. Add clip (optional, if sliding the box is OK)
     
  2. Add fastener bar
     
  3. Slide in the accessory box to the fastener bar

Attribution: The pan and the adapter for the fastener bar is novel. The fastening bar was heavily modified from the hook available in FryedWater’s Tool Holder. The dovetail groove was heavily modified from STSUL.CZ’s double breasted dovetail model. The clip/slide lock is a modified (fatter) version of Speaka’s 20x20 profile clips.

Print options tested on a Bambu P1S: PLA, 0.4 mm nozzle; 0.2 mm vertical, no supports needed.

Tags