ES15 electric screwdriver slide-in case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a TPU sleeve style case for the miniware ES15 electric screwdriver and 4 bits.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 793
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a sleeve style protective case for your ES15 screwdriver. The bits and the ES15 are held in the case with friction. First do a test print of just the end portion, to test the fit of the bits and the screwdriver into the case. This lower portion is the part that “grips” the screwdriver. The upper portions have more clearance.
The support part helps keep the tall print secure on the bed. It may or may not actually be necessary. It's worth first attempting to print the sleeve by itself, as the two parts together take 3X (ish) longer to print. (Update: on my printer I can print the case nose down with no support. This reduces print time substantially.)
With the cap removed, the charging port is exposed, so the tool can be charged while in the sleeve. When working on quadcopters my most used bits are 1.5mm hex, 2.0mm hex, and 2.5mm hex. If I keep one of these in the tool, this case lets me carry the other two, plus two more bits for easy access. I put the two unused hex bits on the sleeve towards the clearance pocket for the display. Then it's easy to know which way to insert the screwdriver into the sleeve so the display lines up with the pocket.
The cap is a slip fit on both ends of the case. On the aft end, it protects the charge port and set button. Park the cap on the front end to remove the screwdriver from the case.