1 / 2
Comgrow T300 Bambu lab hotend adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to use Bambu lab hotends on Comgrow / Sovol T300
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 55
- Makes
- 0
- Views
- 408
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Adapter to use Bambu lab hotends on a Comgrow T300
You'll need:
- 2 M3 inserts
- 2 M2 inserts
- 1 small piece of PTFE tube
- 2 M3 x 20mm screws
You may need to tap your hotend heatsink to mount the fan
The M3 screws that hold the hotend go in from the left side, so you can change the hotend without needing to remove the inductive sensor
Edit: v1.2 - reduced the side length a bit