Metal board hook (with squared holes) - which fits in provided lock hole (use this negative into any object, which you want to hang).
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.21 – €0.25 net (excluding VAT)
For file: peg_hang_keyhook_0.15mm_PETG_MK3S_19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.23 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 19.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Metal board hook (with squared holes) - with lock mechanism for hanging any other object (negative elem. provided)
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 96
- Makes
- 1
- Views
- 565
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
UPDATE 13.1.2022:
- added bigger version, no support needed, better hook stability
When:
- when you have metal board with squared holes
- when you want to hang on it any of your prints
- especially when your print has its back side printed as first layer (so with this you avoid support of the back)
- can be used with any of your prints for hanging on metal board
What to print:
- you just print given keyhook
Dimensions:
- this hook passes in metal board with squared holes, which are about 1cm wide
- metal board thickness for this is up to 1mm
- you can adjust these dimensions if you have different square holes or more/less thick metal board
- the part of hook on which hangs any of your print - is in scale with negative element that I have provided.
- this hook part is quite small (like the smallest i would suggest to print), but you can scale this part up - together with hole negative to be more reliable if you wish (and if you have more space inside of your print
Print instructions:
- print only keyhook
- put negative STL as negative object to any of your model - and given keyhook will fit in it nicely, so it can be hanged on it
- note that in given sample of keyhook - given part is slightly off the bottom - so it needs support, when removed, it will not look nice, but it is the inner part of the hook, so it does not matter much
- can be also adjusted when the hook will be modifed with hole negative, so it can be printed as a whole without support