1 / 2
BTT SFS V2 Sovol SV06 mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a simple mount for the BTT Smart Filament Sensor V2. I was always missing the filament sensor on the SV06.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I always missed a filament runout sensor on the SV06.
Luckily the motherboard comes already with the needed ports. I simply removed the cable which extends the toolhead PCB runout port and connected the new sensor directly to the motherboard.
print settings:
0.28mm draft mode is good enough
0.4mm nozzle
The screw holes are a tat tight, but you can push them through with a screw driver. Use the screws which came with the BTT SFSv2.
printer.cfg:
[filament_switch_sensor filament_sensor]
switch_pin: PA4 # add a ! if your is "Pulled-high"
pause_on_runout: True
insert_gcode:
M117 Insert Detected
{ action_respond_info("Insert Detected") }
runout_gcode:
M117 Runout Detected
{ action_respond_info("Runout Detected") }