PowerBrush Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.21 – €1.48 net (excluding VAT)
For file: Adapter v1_0.2mm_PLA_MK3S_1h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.35 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.58 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An adapter to create a power brush out of a normal brush
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I bought a cleaning brush as can be seen on the screenshot, Brand “Frida”, available in the Dollarstore or Rusta in Sweden, maybe elsewhere as well. You can probably use another brand as well, just make sure the measurements match, or make a remix :D I went for wood so I could drill into it.
I had some screws laying around that would not go too deep into the wooden brush.
I printed mine in PLA at the default 0.2mm quality, then I changed the perimiters to 5 for extra strength.
Assemble
- Take the brush part out of the brush. Can be done easily by pulling it (you can even re-add it later)
- Align the print with the brush, tip: use some masking tape to keep it in place
- Take a small wooden drill and insert it into the holes. give it a gentle nudge to give your screws a starting point in the wood
- insert the screws so the adapter is stuck to the brush (make sure they don't go all the way through or you'll have some nasty scratches if you use it)
- Done, put it on your screwdriver and clean with force :D