1 / 4
Good VFG
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are lots of angled foregrips out there, but very few good vertical ones. Here's a good vertical one. Print the bits as shown, then put all the bits together. the pins should be a pretty tight fit. Mine friction fit tightly enough that I don't need any glue to keep them together, but it might be a decent idea for longevity. Uses 2 M5x30mm pan head screws and M5 nuts to attach to the blaster. No other hardware.