1 / 14
Case for MMU 3MS
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My version of the case for MMU 3MS
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 73
- Makes
- 0
- Views
- 894
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My version of the case for MMU 3MS
The case is designed for use with the following devices
- BTT MMB board
- Feeder LERDGE
- Motor Nema17 (17HS4023)
- Led WS2812 10mm
- Cooler 3010 (12v > connect 5v)
- Switch OMRON D2F-5 for runout sensor
- Steel ball 5mm for runout sensor
The input sensor of the feeder requires modification. Instead of a resistor, install a jumper (red arrow). On the connector, use the two outer contacts. To fix the output sensor, use a screw (yellow arrow)
The case is designed so that the board, feeders, cooler, and wire entry can be installed in a mirror image, depending on the installation location of the MMU.
My projects that might be interesting with this device