1 / 5
HDD Sliders 3.5" for Chieftech BA-01B-B-B Chassis
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plastic sliders for 3.5" HDDs for Chieftech BA-01B-B-B chassis.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 63
- Makes
- 1
- Views
- 234
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Plastic sliders for 3.5" HDDs for Chieftech BA-01B-B-B chassis.
Notes
Made 2 versions for pin from original sliders and 1 version for generic screws.
Spares can be stored inside chassis on the interal beam by middle hole.
Models
- HDD-Slider-Pin.stl - For original pin
- HDD-Slider-Pin-S.stl - For original pin (hole little smaller for pressfit)
- HDD-Slider-Screw.stl - For generic HDD screw
BoM (1 set)
- Printed slider: 2pcs
- Original pins or HDD screws: 4pcs
Printing Details
- Color: Any
- Material: PETG, ABS, ASA, Nylon
- Nozzle Diameter: 0.4mm
- Layer Height: 0.1mm recommended, 0.2-0.3mm doable
- Top / Bottom shell: 1mm
- Number Of Walls: 5 (2mm)
- Infill: Gyroid 15%
- Supports: Yes
- Print orientation: flat, as designed
- Brim: No