Soundsticks desk side mount mini shelf
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.25 – €3.97 net (excluding VAT)
For file: Soundsticks desk mount - 16mm cutout_0.4n_0.2mm_PLA_MINIIS_2h54m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.61 excluding VAT (range midpoint).
- Weight reported by the author
- 60 g
- Print time reported by the author
- 2.9 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mini shelves to side-mount the Harman/Kardon Soundstick speakers on a desk.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Mini shelves to sidemount the Harman/Kardon Soundstick speakers onto a standing desk with a metal frame and a glass top.
The tabs stick into the space between the glass top and the metal frame. I added thin, sided tape on the top part of the tab that sticks out and to the flat side that faces the desk. The Soundsticks fit on top without anything else to assist.
Printed upside down using the 0.20 mm structural settings, with 5% rectilinear infill, supports on build plate only with 50% first layer density and grid support 4mm spacing.
The versions with a cutout are because desks have different support points that would prevent the tab from entering the intended space. The cutout avoids those supports. Mirror the print if you want the cutouts to change direction.