1 / 5
Voron 2.4 Internal circulation air filter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Better air filter for your Voron 2.4 350
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 29
- Makes
- 0
- Views
- 840
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
I found the open-loop air filtration and ventilation system inefficient and energy-wasting. Therefore I redesigned the air filtration system for my Voron2.4 350. These modifications and upgrades include
- two 6*25 fans from Noctua (6*20 fans are also fine)
- 8 M3*30 screws as the fixture
- 3D-printed parts (uploaded below)
- new 3mm thick acrylic board (laser cutting file uploaded below)
I have installed this system on my voron2.4 350, which operates amazingly well! The wind power of the intake fan can hold a normal tissue tightly (as shown in the image uploaded above).
Main benefits:
- Keeping hot air in the heating chamber
- Better air quality for indoor Voron users
- Easy assembly & installation
What do you need:
- Two 6*20 fans (Model No. 1 and No. 3 are optional) / Two 6*25 Noctua fans (Do not print model No. 1 and No. 3)
- Must need Model No. 2, No. 4, No. 5, and the air duct cover (not labeled in the image)
- eight M3*30 hex socket cap screws
- Important! You need to cut a new piece of acrylic board for this upgrade, I have put a .dxf laser cutting file below, you may find it in the “Other files” section
Please kindly leave a comment below if you also want a close-loop air filtration system for different sizes Voron, I am always willing to help.