Apollo MTR-1 Alternative Ball Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some alternative mounts for the MTR-1, wall and desk.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 70
- Makes
- 1
- Views
- 317
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two different mounts for the MTR-1, based upon their STEP file for the male mount.
One is a much longer mount, stronger, and larger mounting plate, that can take #8 screws.
This longer ball mount will let you use a standard USB-C cable that doens't have a right angle.
The other, two parts, is for mounting on a desk. You can add some weight to the base, or sticky tape, or something to help old it still. USB cable feeds through the stand.
Need to print both parts. Press fit. Depending on your printer, you might need a little glue to really hold it (but shouldn't).
I still use the small slip over base that comes with the MTR-1 to help hold the back in place.
You also need to print the ball mount back found on the original.