ERC1602-4 I2C 16x2 LCD case for fischertechnik
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Conventional 16x2 character LCD displays with hd44870 controllers are huge. They get even bigger with a PCF8574-based…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 174
- Makes
- 0
- Views
- 1,726
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Conventional 16x2 character LCD displays with hd44870 controllers are huge. They get even bigger with a PCF8574-based I2C module attached to their back.
Buydisplay.com sell the EastRising ERC1602-4 LCD series with a chip-on-glass (COG) ST7032 I2C controller which is much more compact. This allows for a lean and sexy 75x30x15 mm fischertechnik-compatible case. It's I2C connector is compatible with ftDuino and ft TX connectors.
Connectivity is accomplished with a simple perfboard PCB. Connections:
- pull up RESET (pin 1) with a 4,7k resistor
- pin 9 to VDD, pin 10 to GND for I2C mode
- never forget a capacitator with correct polarity between pins 11 and 12, or you'll get display errors, I used 1µF
- the 47 ohm LED resistor is for VDD = 3,3V, with 5V you'll need a bigger one
SCL, SDA, GND and VDD for I2C Use the comment sections or contact me directly if you need more info.
Please "like" this thing or post your make as a token of appreciation for my work.
Find my other fischertechnik designs here.
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
Yes
.1 mm
Infill:
20 %
Filament:
any PLA/PETG any
Notes:
The bottom case prints better with supports close to the IC2-connector.
Category: Construction Toys