Rugged Box for Vials of Peptides, K-Beauty, or GLP-1 Medicine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3x2 gridfinity box with an insert to organize medicine vials
- Rating
- 5 / 5
- Likes
- 303
- Downloads
- 2,576
- Makes
- 8
- Views
- 16,798
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Share Alike
hello! This is a rugged box with an inserts to organize medicine vials like those used to hold compounded semaglutide, tirzepetide, retatrutide, peptides, K-beauty, TRT, Ozempic, Mounjaro, etc. It uses the Gridfinity system.
It keeps your medicine sealed away from the butter and eggs. I hope you like the design.
The inserts have 17mm holes for 3ml vials, and 25mm holes for 10ml vials, then a larger cutout for a 30ml vial on its side. The latch is 19mm wide and the ribs are 4mm thick.
The assembly requires at least two M3x25mm, or M3x30mm for the latch grab bar. You can also attach the hinges and latches using four more.
Alternately, to save your long screws, the latches and hinges themselves can be attached using a total of eight M3x12mm screws, one in each side, either button-head or sockethead will work.
The box is best printed at .20 layer height, although the latches look fine at .30 layer height.
I have had some success using 3D printed screws, using Polymaker PolyMax tough PLA Pro and using .15 layer height.
The designs shown are in PLA and have Polymaker Panchroma Matte Muted White (my favorite color), and Matte Fossil Grey, Hatchbox Matte Olive Green, Prusament Galaxy Black (my GOAT), ForceForge Galaxy Black and Burnt Titanium
I use black M3 screws from this set which are HQ and dont leave soot marks.
If you print the screws, make sure to use a filament like Polymaker PolyMax PLA which has a bit of flex and wont snap like standard PLA will.
If you want me to print the boxes for you, I have an Etsy Shop that I just started
Multicolor honeycomb lid — PrusaSlicer instructions
Print the lid with its decorated outer face against the build plate. The lid and honeycomb should both sit flush on the plate to produce a smooth, two-color surface.
Select your printer profile.
Choose a profile configured for multicolor printing, such as a Prusa MMU or multi-tool XL.Import the lid.
Loadrugged-box-3272-top-thin-19mm-hinge.stlinto PrusaSlicer.Add the honeycomb to the lid.
Right-click the lid and choose Add part → Load…. Selectlarger_honeycomb_for_3272_box_top.stl. The honeycomb will appear beneath the lid in the object list as a separate part of the same object.Place the decorated face down.
Select the complete object. Press F for Place on Face, then click the lid’s flat outer face so the honeycomb design faces the build plate. Check that the honeycomb is aligned with its intended location in the lid.Set both parts flush on the build plate.
Expand the object in the right-hand list and select the honeycomb part. Click the Drop to bed button in the right-hand pane. Repeat for the lid if needed. This places both parts against the plate without splitting the object or changing their horizontal alignment.Assign the colors.
In the object list, use the extruder selector beside each part to assign the lid to your main color and the honeycomb to your accent color. Use compatible filaments, such as two colors of PLA.Slice and check the first layer.
Click Slice now. In Preview, select Tool as the coloring mode and move the layer slider to the first layer. Confirm that both the lid and honeycomb appear in their assigned colors. Check the following layers for gaps or missing details.Save your project and print.
Choose File → Save Project As… to save a 3MF with the part positions, color assignments, and settings. Export the print file for your printer when the preview looks correct.
Existing project: You can also open MK4S_MMU3_rugged-box-3272-top-thin-hinge_generic_PLA.3mf as a project to use its saved setup. Check the printer profile, filament assignments, and preview before printing.
Note: This design uses two colors within the same layers. A simple filament change at a layer height will not produce the honeycomb effect.