1 / 4
Epson UST Projector Vesa Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Epson Ultra short throw projector vesa adapter
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 49
- Makes
- 0
- Views
- 292
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This was made specifically for a Epson 695wi but should hopefully work for any other projector of the same form factor to mount with a 75 or 100mm vesa mount. Made to work with either a m4 heat insert or my preference, a t-nut for more strength. I used this t-nut, its a snug fit so will need to be press fit. I found it easiest to do so with a m4 bolt and washer on the other side to pull it into place . You will need m4x12 or m4x16 bolts for the 5 projector mount points and m4x12 for the vesa mounts.