Aerodynamic and sturdy bike computer mount (Wahoo and Garmin) with integrated light/GoPro mount for aero/triathlon/TT cockpits
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sturdy, sleek and easily 3D-printable mount for Wahoo and Garmin bike computers with mount for lights or action cams
- Rating
- 0 / 5
- Likes
- 10
- Makes
- 0
- Views
- 1,113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Standard Digital File License
A sturdy, sleek and easily 3D-printable mount for Wahoo and Garmin bike computers with integrated mount for lights or action cameras.
The mount can be printed with minimal supports and the computer mount is fully integrated in the part without needing a separate insert.
----Features----
- Standard 22.2mm extension mount
- Easily 3d-printable with minimal supports
- Wahoo and Garmin mount are fully integrated and 3D-printed in one part
- Aerodynamic, sleek shape
- Integrated light or action camera mount
----Versions----
- computer mount: Wahoo Bolt Elemnt Bolt, Roam/Ace (not specifically tested with Ace but should work) or standard Garmin computer mount
- light mount: Direct GoPro mount or SPconnect mount or no light mount
(SP connect version requires SPconnect camera/light adapter kit or 3D printed equivalent adapter)
----Required Hardware----
- M5x30mm cylinder head bolt.
----Installation----
1. Slide mount on extension
2. Insert wedge in cut-out
3. Tap bolt threads
Insert the M5x30mm screw from the rear and screw it into the mount until the mount is tight on the extension. The first installation will be hard since you are simultaneously tapping the threads.
Untighten the bolts slightly to take out the extensions again.
----Print settings----
material: PETG
layer height: 0,2mm
cooling: yes (40-100% on A1 Mini)
infill: 25% (cross-hatch or gyroid ideally)
wall loops: 6 (with 0.4mm nozzle)
Supports: Only necessary for overhangs of computer and light mount.
----Print Orientation----
See image for print orientation of parts.
- Print Mount on rear face so that the hole of the extensions is in-plane when printing.
- The wedge can be printed on either the slanted side or on its rear side with supports. With a textured plate printing on the rear side is preferable to have a smoother surface on the slanted side that slides against the mount.
----Bambulab Preset----
I use Bambulab 0.2mm Strength profile with Cross-Hatch infill and supports turned on.
----Tags----
cycling, triathlon, aeroad, aero, time-trial, tt, bars, cockpit, holder, wahoo, elemnt bolt, elemnt roam, elemnt ace, garmin, spconnect, gopro