42mm cnc spindle cover and switch top.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A press-fit cover for the standard 42mm spindles that come with cheap CNC's like 1610's etc. Protects the terminals…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A press-fit cover for the standard 42mm spindles that come with cheap CNC's like 1610's etc. Protects the terminals and provides a outlet (either side) with slots so a cabletie can be used for strain relief.
Needs support to print due to the internal terminal channels. For me the press fit worked perfectly, your mileage may vary.. I am using a very rigid 'flexible' PLA for the toolhead bits of my CNC so I had a bit of flex to play with. I'm basically assuming any CNC owner worth their salt will be able to get this fitted snugly.
- take care about clearance to the Z lift motor! I kept the design as flat as possible at the back but still only have 2mm or so clearance.
- dont block the airholes, they are important.
Top cap is separate; a blank one is provided you can drill/customise yourself, plus versions with a standard 12mm rocker switch and LED hole (I used a big 8mm led I had lying around unused and unloved..)
Scad file included; feel free to customise/comment etc.
Category: Machine Tools