Pwnagotchi + Waveshare UPS HAT (C) Case with MOLLE Strap Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Pwnagotchi case with a Strap Mount
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 183
- Makes
- 2
- Views
- 1,504
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Public Domain
This design is a case for a Pwnagotchi build using:
- Raspberry Pi Zero 2WH
- Waveshare UPC HAT (C)
- Waveshare V4 2.13" E-ink Display HAT
- a MOLLE Strap like this one
- 8x 2.5x3.5mm screws
It is designed to fit a non-slim variant of Pwnagotchi (no GPIO headers shortening, no Waveshare V4 SPI connector desoldering etc.). Just use the components as they came from the vendors.
The design takes into consideration the cutout for Waveshare V4 stiff ribbon cable and the MOLLE Clip button cutout for easier attachment.
Printing
I've printed mine using Bambu Lab P1S with:
- Generic 1.75mm PLA filament
- Layer height: 0.2mm
- Sparse infill density: 15%
- Sparse infill pattern: Grid
It feels sturdy enough, but I didn't test it in the wild yet.
Building
- (optionally) level the Waveshare V4 with RPi.
- I've put 7 layers of adhesive tape on the SPI connector to lean it on the RPi's micro-USB port
- attach the SD Card, HDMI and Power Switch Plates to your Pwnagotchi
- put it on the Base
- attach the Vent Plate
- cover the Pwnagotchi with Screen Cover
- screw the 2.5x3.5mm screws in both Base and Screen Cover
- attach the MOLLE Strap
- (required) mount the whole thing to your backpack and hack the planet
Disclaimer
Keep in mind that I am not a skilled 3D designer (yet!).
This design is my first serious attempt to remix an existing design into something I am happy with. While it suits my needs, it might not fit yours - feel free to comment, or, even better, to improve it!