Philips Steam Iron Quick Calc Release Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the holder of Philips Steam Irons limescale collector.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 82
- Makes
- 1
- Views
- 391
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
EDIT 27. Feb. 2025:
As mentioned in my edit from 20.January. I printed the limescale holder in PA-CF. Too badly, this filament is very brittle and the thin hooks break very easily. I don't plan to find a suitable solution.
EDIT 20. Jan. 2025:
PETG doesn't withstand the high temperature when using the iron for longer than 30 min. I've ordered now Nylon PA-CF composite material which should withstand temperatures up to 200°C. I'll update here about the outcome.
Original Description:
The very thin hooks holding the limescale collector break often even when being very careful when removing it. I decided therefore to design and print the holder and slider instead of spending around 10 € for a spare part.
Replacement for CP2041/01 compatible with Philips Azur 7500 and Azur Steam Iron (Models CG45xx. / CG49xx)
Included are the Holder and Slider STL files. Existing limescale collector will fit into the holder. If you would like to perform some modification, I’ve also uploaded the STP file.
Print settings:
| Filament: | See comment from 20. Jan. 2025 | |
| Infill: | 15% | |
| Support: | Slider: | None |
| Holder: | For support enforcer only. In Prusa Slicer use ‘Automatic Painting’. See picture where support is required. | |
| Layer Height: | Slider: | 0.10 mm |
| Holder: | 0.15 mm | |