GDCHP 65W Hot Plate Bottom Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A better bottom cover for this generic, cheap 56x56mm SMD reflow hot plate.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 12
- Makes
- 1
- Views
- 355
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
The adhesive black rubber square that comes pre-applied to the bottom of this hotplate doesn't adhere well to it, since the mounting screws of the internal PCB protrude a bit.
This alternative bottom plate solves the problem by letting you use your own double-sided tape; depending on its thickness you may want to print the flat (1-2mm) or the sculpted (<1mm) version. If you saved the original cover you can always reapply it for an extra anti-slip effect.
---
You will find this 56x56mm hot plate under various names: GDCHP, PD65, G3061, and probably others. It may also be marketed as MHP30, but it's most probably just a clone that piggybacks off the name of the real Miniware product.
For some more technical info and a better PID tune, see here. I'd also experiment with halving the P term to get a slower temperature raise and lessen the bowing of the plate.