Hip Stem Bed Adhesion Test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hip Stem Adhesion & Cooling Test: Stress your printer’s adhesion, overhangs, cooling, and explore orthopedic implants
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 39
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This Hip Replacement Stem Test Print is more than just a calibration tool—it’s a functional test of your printer’s limits and a nod to cutting-edge orthopedic design. With a unique geometry inspired by advanced hip replacement stems, this model challenges your printer in several critical areas:
Bed Adhesion Test:
The stem’s 12.5mm diameter head taper is the sole contact point with the bed, offering a demanding test of your printer’s ability to maintain adhesion on a small surface area.
Overhang Stress:
The stem’s 135° neck angle creates a distal end that prints at a 45° angle to the bed, putting your overhang capabilities to the test.
Cooling Challenge:
Featuring overhangs, sharp angles, and lower layer times on narrower sections, this model highlights the effectiveness of your cooling setup, ensuring layers solidify properly without sagging or curling.
Educational Opportunity:
This model is perfect for anyone interested in orthopedic medical devices, showcasing design elements found in cutting-edge hip stems used in joint replacement surgeries.