1 / 6
Vacuum splitter 35mm / 2x 40mm - Splitter für Werkstatt Staubsauger wie Kärcher - No support — image 1
1 / 6

Vacuum splitter 35mm / 2x 40mm - Splitter für Werkstatt Staubsauger wie Kärcher - No support

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Split suction hose into two connections, for milling table and circular table saw - zwei Absaugungen an einem Anschluss

Rating
0 / 5
Likes
10
Downloads
31
Makes
0
Views
301
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Deutsche Beschreibung - s. u.

Splitter to connect two devices or extraction points to one vacuum. I use it on my workbench for the router and the circular saw for extraction at the cut and under the table.

The tool connections have a diameter of 40 mm, the connection for the vacuum 35 mm. I use it with the WD series vacuums from Kärcher. On the tool side, I use the Kärcher extraction set for power tools. Thanks to the multi-stage rubber adapter, the set fits every tool and furthermore most vacuums.

Printing
  • Material: Prusament PLA

  • Support: no - print standing on the side with two holes

  • Brim - I printed without Brim on the Prusa Smooth PEI Print Sheet, you may want to use a brim on other surfaces since the base area is quite small

  • Layers - 0.2mm, thicker layers are probably also fine

  • Perimeters: 2mm

  • Infill: 15% Gyroid

  • Print files included are for the Prusa MK4/S with HF nozzle and PLA

If you find my designs useful, you might consider buying me a coffee. But of course, you don't have to - my designs are free and always will be.

Deutsch

Splitter um zwei Geräte oder Absaugpunkte an eine Absaugung anzuschließen. Ich nutze es an meiner Werkbank für die Tischfräse und die Tischkreissäge jeweils zur Absaugung am Schnitt und unter dem Tisch.

Die Werkzeuganschlüsse haben 40mm Durchmesser, der Anschluss für den Staubsauger 35mm. Ich nutze es mit den Staubsaugern der WD Serie von Kärcher. Werkzeugseitig verwende ich das Kärcher Absaugset für Elektrowerkzeuge. Durch den mehrstufigen Gummiadapter passt dieses Set an jedes Werkzeug und außerdem an praktisch alle Staubsauger.

Druck
  • Material: Prusament PLA

  • Support: ohne - auf der Seite mit den zwei Löchern stehend drucken

  • Brim - Ich habe ohne Brim auf dem Glatten PEI-Stahlblech von Prusa gedruckt, auf anderen Oberflächen mag Brim wegen der kleinen Grundfläche erforderlich sein

  • Layers - 0.2mm, dicker ist vermutlich auch ok

  • Wandstärke: 2mm

  • Infill: 15% Gyroid

  • Die Druckdateien sind für Prusa MK4/S mit HF nozzle und PLA

Falls Sie meine Dinge nützlich finden, können Sie erwägen, mir einen Kaffee zu spendieren. Aber Sie müssen natürlich nicht, meine Designs sind frei und werden es immer bleiben.

Tags