1 / 6
4x Filamentalist F1 Smala Drybox
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4 x Filamentalist F1 v0.2 in a IKEA Smala 22l DryBox
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 42
- Makes
- 0
- Views
- 668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
4 filamentalist F1 in a smala 22l drybox
BOM for fixing the 4xF1 on the 2 feet :
- 8xM3x14
- M3x9x1 washers
- 8 M3 thread insert
Insert the M3 threads fully, they are not flush, they go 2/3mm inside the foot.
Drilling :
Use the drill guide with a small piece of ptfe (~23mm) to mark the drill spot (see photos).
To avoid cracking the plastic, use a wood drill bit.
Do not press to much while drilling, take your time !
Added a little tool to help pressing the ecas to release the ptfe tube.
Spools width successfully tested so far :
- bambulab 1kg spool
- sunlu 1kg spool
- qidi tech 1kg spool