Receiver shelf for Freewing T-33 Shooting Star
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a receiver shelf for the Freewing T-33 Shooting Star to be placed between the EDF intakes behind the Blue Box.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is a receiver shelf for the Freewing T-33 Shooting Star. It is designed to go under the cockpit / hatch between the EDF inlets, behind the Blue Box and above where the wing connectors enter. Placement is not too far off CG and if glued in level it should provide a good platform for a gyro if you want one.
I printed this in ABS with 0.4mm nozzle and 0.2mm layer height, 4 bottom layers and 2 perimeters, 15% hexagon infill, no top layers. That way it came out quite light and still stiff enough, but any material and print setting should be fine in principle. I glued it in “upside down” (smooth surface up) with foam glue. Make sure to glue it in low enough so that your receiver clears the underside of the hatch.
The OpenScad file is also attached in case you would like to modify it.