Steba ED4 - Filament Dryer Conversion - Top
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Top piece for using the "Steba ED4 Dehydrator" as a Filament Dryer. With this you dont have to use the original trays.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Standard Digital File License
Top piece for using the "Steba ED4 Dehydrator" as a Filament Dryer.
With this you dont have to use the original trays, and they can still be used for food.
2 versions, with room for 1 or 2 spools.
I bought my ED4 for around 38usd.
1x Spool.
236mm x 236mm x 100mm
0.3mm, 4 walls. Has no infill. No Support.
178g. Print time is around 2 Hours 20 Min for me.
2x Spool.
236mm x 236mm x 150mm.
0.3mm, 4 walls. Has no infill. No Support.
Printet in Elegoo Rapid PETG.
232g. Print time was 2 Hours 46 Min.
Unless you only use PLA, it should be printet in something else, as the drying temp for some materials exceed 60c.