1 / 2
10" inch wider Rack Modular Tray System for RaspberryPi (Tray)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
for wider 10" racks (front panel is 258mm width)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 372
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
For my wide 10" rack I made a model with a wider 258mm panel with wide holes for versatility.
Printed with PETG in one piece diagonally layed down to face - I got a good result.
PLEASE NOTE: that the height of the pyramidal panel latches was taken from the original model - and there is a problem there. I had to print the handles from the original project, disproportionately reduced in depth by 2 mm (then the distance to the latches decreased to ~1.5 mm and it began to latch well.