1 / 4
Yaesu 991A Microphone Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yaesu 991A or 991 Microphone Holder
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 51
- Makes
- 1
- Views
- 214
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Yaesu 991A Microphone holder, mounts to the side of the radio in the two per-existing mount holes, requires 2 M4-0.7 x 10MM screws.
991a-mic-bracket.stl: the mounting bracket with the microphone holder attached
bracket.stl: the bracket as a standalone stl if you wanted to try mounting something else to it.
Notes:
Supports not necessarily required, but if you don't use them the fit for the microphone is quite snug and depending on the filament used you may have to file some blobs down to fit the microphone in properly
0.2mm layer, 3 walls, 15% infill