1 / 10
Adjustable display stand (With platform on ball joints)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable display stand
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 40
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The whole model consist of few parts:
- Lower platform
- Upper platform
- Lower tower (Print in vertical position)
- Rotating wheel
- Upper tower (Print in vertical position, increase brim)
- Ball joint
- Ball joint nut.
- Holding clips for exhibition model.
Assembling
- Press rotating wheel into lower tower with some power:
- Assemble all tower part together:
- Insert assembled towers firmly into lower platform to appropriate positions:
- Connect upper platform, previously adjusting the towers to appropriate level:
- Insert holding clips where needed and place your exhibition model:
- Adjust rotating wheels where necessary to make the best angle of inclination of your model:
