SEM stub holders (Electron Microscopy)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SEM (Scanning Electron Microscopy) stub holder, mounting platform and storage insert for pipette box.
- Rating
- 4.667 / 5
- Likes
- 16
- Downloads
- 303
- Makes
- 3
- Views
- 1,459
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
Always annoyed by commercial SEM stub holder for four stubs, while I can have five samples in one run. So I decided to design an holder for five SEM stubs (standard stub with a diameter of 3.2mm)
The cover fits perfectly on top of it, but the printer must be dialled in properly. Otherwise print the cover at 1% bigger to be on the safe side (or get ready to some sandpaper action).
For storage of the stubs, I also designed an insert which fits a pipette box (67x105mm).
Once I was at it, I also designed an holder for the stubs mounting and transporting from the sputter station to the SEM.
And I've also added a single “clamp” for the SEM stubs, so you can attach it whatever you want to design.
Print at 50% infill or more, to be sure that the “clamping” mechanism doesn't break, and has fun.