Hoid for president.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hoid for President Hueforge
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 33
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Hoid for President Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 157.7x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Silver
At layer #14 (1.2mm) swap to Jade White for the rest.
Make cosmere great again