1 / 2
Thrusmaster TMX/T150 steering wheel bar mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bar mount for Thrustmaster steering wheel. OpenSCAD file is provided to adjust the bar diameter.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 26
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
Current model is for 25mm bars. For other bar diameters, adjust “d_bar” in OpenSCAD file, and maybe “l_screw” and “ep2”.
It prints on Prusa Mini. Use PLA or PETG. Increase the number of walls (both perimeters and bottom/top). I used 6. Infill 30%. No support.
With the current dimensions, additional hardware required:
- 3x M10 screws, 30mm length
- 1x M10 large washer
- 2x M10 wing nuts
Despite the large dimension of the wing nut, it may be hard to tighten enough by hand so that there is no slip at all. An additional 1/4th turn with pliers should help.