Prusament remining guide PETG
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.29 – €0.36 net (excluding VAT)
For file: prusament-remining-guide-PETG_0.2mm_PETG_MK3S_2col.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.33 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 23.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Plug with material name to Prusament spools. It indicate the remaining length of filament.
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 2
- Views
- 315
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This material name plate is inspired by "Prusament PETG Meterial Label" of Dominik Cisar. The material name plate is convenience to discriminate diverse Prusament spools. One day, I found the remaining length guide inside of prusament spool. It is helpful for us. But it is difficult to look, when the guide is located back side of printer (black color is also). So I merge the material name and remaining length guide.
Place this name plate to hexagonal holes of spool edge on blank plate of Prusament spool.
Keep in mind to clip the label into the right slots.
The .3mf and gcode files are made for 2 color printing. Just 2 layer printed out, you can change filament color.