1 / 3
Hackintosh Powermac G4 Motherboard Tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My motherboard tray was crumbling, so I designed a new one.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I needed a new motherboard tray so I designed one. The dimensions are set to the size of my Asus TUF Gaming B550M-Plus WiFi motherboard.
To use this, you have to do the spring mod, so that your case opens and closes by pushing in the rear lock. You can get some guidance with that by visiting this url where I presented the tray: https://www.tonymacx86.com/threads/3d-printed-motherboard-tray.328535/
There are 2 files, because the tray is too big to print in my Bambu P1S. Each side of the tray gets bolted in place using the original tray bolts.