Harry Potter Litophane lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created a litophane Harry Potter lamp and a spacer to connect the hat and lamp.
- Rating
- 0 / 5
- Likes
- 84
- Downloads
- 320
- Makes
- 0
- Views
- 1,555
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lithophane Harry Potter lamp made from the Lithophanemaker.com sphere tool .https://lithophanemaker.com/Lithophane%20Sphere.html
Print settings i used :
I used white PLA Nebula
- 0.4mm nozzle
- 0.12mm layer height
- 100% infill
- I only printed the hat with supports.
Speed : its imported to not print this too fast (around 40mm/s )
-printing temperature: 202 degree
Next is the lamp composed of a hat part and a base led kit 001. These models are not created by me, but I will attach links to these models from the authors here.
base led kit 001 : https://www.printables.com/model/865798-base-for-led-kit-tealight-36mm-other
hat : https://makerworld.com/en/models/843138?from=search#profileId-789741
The hat, spacer and base models must be set to scale so that the model is the same as in the picture and fits into the litophane lamp.
hat: X:95mm , Y:95mm , Z:100mm
spacer: X:90mm , Y:90mm , Z:16mm
base: X:84.31mm , Y:84.31mm , Z:17.39mm