Paint Brush Rack - Small
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.00 – €2.44 net (excluding VAT)
For file: Base (XL)_0.4n_0.2mm_PETG_XL_2h4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.22 excluding VAT (range midpoint).
- Weight reported by the author
- 33 g
- Print time reported by the author
- 2.07 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A rack to store paint brushes on one side, with a place to allow brushes to dry.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 32
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This rack provides vertical storage of hobby paint brushes on one side, and on the other, a place to allow brushes to dry with the brush facing down.
One word of caution. 3D prints aren't necessarily great at retaining liquids and depending on your print, it could be possible for the solvents used to clean your brushes to seep out and get on whatever surface this sits on. So be aware of that, and don't set this down without some protection underneath.
I also designed a larger version which can be found here.
Update
- 2025-02-28: I added a variation of the top portion of the model that has five instead of three slots. This might be handy for those of you who want the smaller version, but need more brush storage.
Printing Tips
- ⚠ The part of this that is intended to hold the ferrule of the brush so it can dry should be printed in Flex material. This is so that that material's natural grip can better retain the brush.
- Do your own slicing for best results.
- No supports should be necessary.