Glider Chock (ASG29)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chock for a glider or aircraft, (or anything with a small wheel)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This chock was designed as an ASG29 hangar chock but would be suitable for anything with a small ~250mm/ 10 inch wheel. It is designed to be a pair with a cord between them for easy handling.
The face of the chock bends around the tyre for maximum contact. The groves underneath help grab the ground.
Print on its base, no supports required
I've printed in PLA with Prusaslicer's defaults
77grams
(If you do download and print, please do leave a make/ review good or bad; it takes time to post stuff on printables and its nice to know people have made use of that effort.
And if you do leave a bad review as something is wrong or your don't like it I get to learn from you and possibly fix it for other people. So don't hold back.)