Wall mount for the baskets i've made !
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mounts for the baskets i've made !
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Wall mounts for the baskets I made !( https://www.printables.com/model/1153224-stackable-lid-for-wall-mount-baskets )
If you made the baskets smaller with a % in your slicer, make sure u print the mounts the same % size (example : 48% baskets then make the brakets also 48%)
-Single mount model : SHOULD BE PRINTED IN PETG/ABS, ONLY WALLS ,could work with pla but the bracket will most likely flex with time !
-Print no support , should have 100% walls/parameter , print on the side the model comes on. (NOT MADE FOR 2 BASKETS TRY AT UR OWN RISK)
-only use the better looking bracket for light stuff inside the basket (<17lbs/20lbs if printed full walls petg)
-Multibasket mount : coming soon !