1 / 6
ABB Tango Zigbee Switch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Zigbee switch to ABB Tango
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 30
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model allows you to fit a Zigbee switch with dimensions of 50×50×8 mm from Aliexpress into an ABB Tango cover.
The battery can be easily replaced—simply remove the front plate with a screwdriver and twist it to the left to unlock.
It is important to purchase the exact model from Aliexpress that has a bottom section to lock it into place on the back of the 3D print.
Installation steps:
- Remove the bottom cover from the Zigbee switch.
- Place the switch into the 3D-printed holder and twist it to the right to secure it.
- Attach the 3D-printed model with the Zigbee switch to the ABB Tango cover and secure it with screws.
- Insert the 3D-printed front plate into the ABB Tango cover.