1 / 3
ReN64 USBC PSU Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the ReN64 PSU module from RexusNexus with a USBC PD input
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
Case for the Rexus Nexus ReN64 PSU for the Nintendo 64. Sits flush with the rear and allows for the USBC PD cable to exit parallel with the rear of the N64.
Only need one of each printed part. The PSU clip goes in after inserting the PSU module into the base of the case and will be quite snug.
Non-printed Hardware:
- USB-C PD Trigger from amazon: https://www.amazon.com/dp/B0DC44YTMW
- ReN64 PSU Module: https://www.game-tech.us/product/ren64/
- 2x #4 x ¾" woodscrews to fasten the top of the case to the main body
- 2x M2x6mm self-tapping screws to mount the PD trigger to the top of the case
- 4x M2.3x10mm self tapping screws to mount the protective cover above the PD trigger.
Desolder the screw terminal from the PD trigger and directly solder the 12V cable to the trigger for the pd_conn_cover to fit over the module.