1 / 6
League of Legends - Arcane Viktor Fidget Gear OG & Anomaly
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replica of Viktor's fidget gear for a cosplay accessory or fidget toy.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 151
- Makes
- 0
- Views
- 1,836
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Replica of Viktor's fidget gear from Arcane, League of Legends. Files include normal and arcane anomaly version. Overall gear about 3" in diameter, scale up or down as needed-note scaling down may result in bearing2 being too thin to print successfully.
Print and assembly instructions:
- For all prints- print “viktor gear-bearing1” and “viktor gear-bearing2”
- Gear printing:
- For normal OG gear- print x2 “viktor gear-normal-half main”. After print, glue together with superglue.
- For anomaly gear- print “viktor gear-anomaly-sideA” and “viktor gear-anomaly-sideB”. If one design on both sides is preferred can print x2 of either.
- For normal and anomaly gear- print x1 “viktor gear-normal-half main” and either of the “viktor gear-anomaly” sides.
- After gear printing, recommend sanding/filing inner edges for better bearing clearance. Can also clean up outer gear edges depending on your printer outline settings (I printed without a brim and found better results).
- After prep work, glue gear halves together.
- After glue sets, insert “viktor gear-bearing1” into gear center. Recommend confirming good clearance before next step.
- Apply small amount of glue on the inner-most part of “viktor gear-bearing2” and place on bearing1. Bearing1 has some small features to line up the pattern of bearing2 so it matches the other side if you like. Be sure to not get glue on the gear-side of the print or you will need to unstick it to spin.
- After glue sets, enjoy your spinning gear!
Can paint before or after assembly.
Provided gear full files if you want to print with supports, but plate side will require a lot of work after.