Coat Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Coat Hanger for thick doors
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Countless hangers are available online, however I couldnt find one which is big enough for our thick doors. Therefore, I have designed one which fits our approximately 38 to 38.4mm and 40mm thick doors. It has proven to be suitable for coats and bathrobes among others. Maybe someone can find it useful!
I have used PLA but you can also use PETG and ASA filaments:
PLA | |
| SUNLU PLA Plus | Amazon |
| Amazon Basics | Amazon |
| GEEETECH Filament PLA | Amazon |
| ELEGOO PLA+ | Amazon |
| eSUN PLA+ | Amazon |
| JAYO PLA+ | Amazon |
PETG | |
| eSUN PETG Filament | Amazon |
| OVERTURE PETG Filament | Amazon |
| ERYONE PETG Filament | Amazon |
| SUNLU PETG Filament | Amazon |
| Polymaker PolyLite PETG | Amazon |
| FormFutura - ReForm - rPET | Amazon |
| extrudr® XPETG | Amazon |
| TECBEARS PETG | Amazon |
| GIANTARM PETG | Amazon |
| Elegoo Rapid PETG | Amazon |
ASA | |
| extrudr® DuraPro ASA | Amazon |
| Polymaker PolyLite ASA | Amazon |
| AzureFilm 3D Black | Amazon |
| eSun ASA | Amazon |
Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.
If you print one, please post a make! If you encounter any issues, post a comment. Thanks!