Focus/Zoom motor for Camera
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.36 – €2.89 net (excluding VAT)
For file: Gears.stl_0.1mm_PETG_MK3S_3h32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.63 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 3.53 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A geard stepper Focus or Zoom motor for motion control, follow focus etc. Standard 0.8 Module gears and 15mm rod attach.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 30
- Makes
- 0
- Views
- 455
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A cheap and dirty focus or zoom motor for timelapse or video. Can be built for about €10. Due to the 3D printed gears there is some slop (backlash).
Uses bipolar stepper so with the correct cable, is compatible with a variety of MOCO systems.
135g
1xM4x20mm Hex head bolt with nut
1xM5x50mm Hex head bolt
5xM3x6mm bolts
4xM2x6mm self tapping screws
Bevel geers adapted from this model by The Two Dimensions
Drive gear created with this tool by SlowMaker and then adapted.