Simple 8020 Drill Jig for 10 and 15 series extrusions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are some basic drill guides for either 10 or 15 series 8020 to help center holes on mechanical 90 degree corners
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 61
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is a simple jig for making mechanical 90 degree joints with either 15 or 10 series 8020 extrusions. You can drill these out for a metal insert, or for just a couple uses use it as is, just make sure if you plan to do this that you add enough extra walls to compensate for the removed material or print it solid. Holes are just over a ¼" for 10 series and 5/16" for 15 series, and I've added .1mm to the inside of the jigs dimensions to allow for thermal expansion on most printers. Should be a nice snug fit without binding. I'll post better pictures later today hopefully once I test it. Holes for 10 series are centered at .5" and for 15 series .75"