Front enforcement for The100 printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fixes the problem where the front rods are pressed out of the frame during Z-homing.
- Rating
- 4 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 1
- Views
- 74
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Enforcement part for "The100" v1.1 printer. I had trouble with the bed leveling being bad, even if I just leveled it just before I printed. After a lot of tries I finally realized, that the printer pressed apart the frame at the front as the metal rods moved in relation to the printer in the Z-connector/front-frame connection. After validating the find by strapping the front of the printer up with zip-ties, I designed these parts which replaces the Z-connector and makes the front of the printer rigid.
Here printed on a Kingroon KLP1 in black "CCTREE" PLA-basic.
NOTE: The parts are to big to print on "The100" itself, so you need to print them on another printer.