Magpul QD Flush Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flush cup insert adaptor for Magpul Type 1 sling mount socket.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 35
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a flush insert adaptor for the Magpul Type 1 QD socket: https://magpul.com/sling-mount-kit-type-1.html?mp_global_color=118
This design should work for any hollow core stock, if you have access to the inside. For reference, I am currently using it on a MDT Field stock. It uses one of the supplied 10-32 screws from the Magpul set, and is threaded ¾-10, so you can either print the nut supplied, or use a regular steel nut and washer. A ¾" drill is required - I found a forstner bit gave a very clean edge. Make sure you have enough clearance for the nut.
I printed face down on the Bambu textured build plate, which gave it a very similar exterior finish as my stock. I am currently using ABS, 100% infill. I have not yet done extensive strength testing, but it holds the weight of the rifle with no noticeable flex.