Roland GO Piano / Keys tablet / phone stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace your oversized sheet music rest with this low profile stand!
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 50
- Makes
- 0
- Views
- 423
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
I wasn’t satisfied with the original sheet stand because it was loosely attached, causing my tablet to sway when placed on it. Additionally, having a small phone positioned awkwardly in the middle of such a large attachment felt impractical.
This redesigned stand fits securely into the grill, providing a stable and convenient spot for your phone and tablet. It also enhances the portability of your entire setup.
Important Notes:
1. Compatibility: The model’s dimensions may not perfectly fit your phone or tablet. Be sure to check the following size limits before printing:
• Maximum phone size (with case): 12 mm thick, 165 mm high.
• Maximum tablet thickness (with case): 15 mm, minimum width: 185 mm.
If needed, modify the model to suit your device dimensions.
2. Printing Tolerances: This model is designed with a tight fit, so results may vary depending on your printer’s calibration. I used a 0.4 mm nozzle and 0.2 mm layer height with default slicer settings. To ensure a proper fit:
• Start with a small test print (10–30 mm wide).
• Check if the test print slides into the grill easily but without gaps bigger than 0.5mm. If it requires forcing it in, this most probably indicate the need for adjustments for the full-width print. The key is for it to be tight enough to be kept in place.
• Use contour compensation settings if needed to fine-tune the fit.
Enjoy!